Sit-on sinks

Detailed search
Product name: Material:
Family: Colour/surface finish
Configuration: Installation type:
Price from: to: Cabinet width: No. of bowls:

Sit-on sinks    

Sit-on sinks assume the function of kitchen worktop by replacing it on top of a kitchen cabinet. They either "sit" at the end of a worktop or connect two worktop ends (one on each side). Alveus Sit-on Sinks normally have a rear wall rim (upstand) of 30 mm, however there are a few versions without it (please see individual sinks description).



The CLASSIC sinks are suitable for the standard width of the kitchen worktops – 60 cm. You can choose between single or double bowl sink with or without the drainer in two different surface finishes – satin and leinen. All Classic models have wall rim (upstand) 30mm high, which prevents possible spills behind the kitchen cabinet.


The COMPACT sink family has been designed to suit narrower kitchen worktops of 500 mm, while retaining the same bowl sizes. You can choose between three different models. All Compact models except Compact 50 have a wall rim (upstand) which prevents possible spills behind the kitchen cabinet.


DESIGN FEATURES of Alveus Sit on Sinks

  • All Alveus sit-on sinks are made of premium 18/10 stainless steel material, in either standard/ traditional Satin surface finish or some models also in Leinen surface finish.
  • The top edge of all Alveus Sit on Sinks is reinforced by timber frame on all four sides.
  • The sinks can be installed as illustrated in the drawing on the left.
  • There are no pre-drilled tap holes, these can be normally cut as per individual requirements by installer/plumber with special cutter (please contact us if you're looking for one)
  • The sinks come with traditional plug holes.
  • The floor of the sink bowls is not over-sloped, it has just enough incline for the water to drain out.
  • The sinks can be installed in combination with standard worktops of 30mm thickness.

Websites on the domain use cookies.
I do not agree